Product Information

High Mounts M & MY series

High Mounts M & MY series

A Compact Body with Excellent Anti-vibration Performance.
Many Functions Assure High Reliability

The high mount series rubber mounts exhibit excellent anti-vibration performance to prevent vibration, shocks and noises from machines and equipment. These rubber mounts can be used simply by placing them on the floor.

  • Download Catalogs
  • Performance &
    Features

  • Specifications &
    standard

    • ・Excellent Anti-vibration Performance
    • ・Use of special rubber which reduces staining of floors (confirmed by internal tests)
    • ・Significant damping effect by adopting high damping rubber (MY series)
    • ・Use of special durable rubber excellent in oil and ozone resistance (M series)
    • ・Machines do not move even by vibration. The layout of machines can be changed to fit the circumstances.

    ・Level adjustment is possible by turning the handle

    ・Possible to install to meet the requirements of floor grade (±3°)

    List of Series

    High mount M series

    • ・Size : 3 types
    • ・Natural frequency : 10~28Hz
    • ・Load range:1550~40000N

    High Mounts MY series

    • ・Size : 3 types
    • ・Natural frequency : 14~28Hz
    • ・Load range : 3150~40000N
    • ・Use of high damping rubber
  • High Mount M series

    • ・Anti-vibration rubber mount : Chloroprene rubber series
    • ・Bearing plates : SPHC, SS400
    • ・Housing : SPCC spark silver metallic (melamine baking finish)
    • ・Bolts : SS400 unichrome plated

    In the case of installation on a graded surface (permissible grade: 3% or less), adjust the level to 50% or smaller than the maximum adjustment level.
    (M19* cannot be leveled when installed on a gradient. Use this for fine adjustment after jacking up)

    Type A : This type is especially suitable for the case when a reduction of vibration transferred to the installation surface is required or when transfer of vibration from the floor to the machine is necessary.

    Note : The outer dimensions of types A and B are the same.
    The bolt lengths marked with an asterisk are the semi-standard type.

    Type B : This is especially suitable when a good balanced of performance in anti-vibration and stability is required.

    Note : The outer dimensions of types A and B are the same.
    The bolt lengths marked with an asterisk are the semi-standard type.

    Type H : This is suitable for applications where stability is important and machine vibration is lower.

    Note : The bolt lengths marked with an asterisk mark are the semi-standard type.

    High Mounts MY series

    • ・Anti-vibration rubber : HDR-type rubber
    • ・Bearing plates : SPHC, SS400
    • ・Housing : SPCC yellow
      (melamine baking finish)
    • ・Bolts : SS400 unichrome plated

    In the case of installation on a graded surface (permissible grade: 3% or less), adjust the level to 50% or smaller than the maximum adjustment level.
    (M19* cannot be leveled when installed on a gradient. Use this for fine adjustment after jacking up)

    Type B : This is especially suitable when a good balanced of performance in anti-vibration and stability is required.

    Note : The bolt lengths marked with an asterisk mark are the semi-standard type.

    Type H : This is suitable for applications where stability is important and machine vibration is lower.

    Note : The bolt lengths marked with an asterisk mark are the semi-standard type.