Product Information

High Mounts LM & LMY series

High Mounts LM & LMY series

A Compact Body with Excellent Anti-vibration Performance.
Many Functions Assure High Reliability

The high mount series rubber mounts exhibit excellent anti-vibration performance to prevent vibration, shocks and noises from machines and equipment. These rubber mounts can be used simply by placing them on the floor.

  • Download Catalogs
  • Performance &
    Features

  • Specifications &
    standard

    • ・Excellent Anti-vibration Performance
    • ・Use of special rubber which reduces staining of floors (confirmed by internal tests)
    • ・Significant damping effect by adopting high damping rubber (LMY series)
    • ・Use of specially durable rubber excellent in oil and ozone resistance (LM series)
    • ・Machines do not move even by vibration. The layout of machines can be changed to fit the circumstances.

    ・Level adjustment is possible by turning the handle

    ・Possible to install to meet the requirements of floor grade (±3°)

    List of Series

    High mount LM series

    • ・Size : 4 types
    • ・Natural frequency : 18~26Hz
    • ・Load range : 1400~18000N

    High mount LMY series

    • ・Size : 4 types
    • ・Natural frequency : 18~26Hz
    • ・Load range : 1400~18000N
    • ・Use of high damping rubber
  • High Mounts LM series

    • ・Anti-vibration rubber mount : Chloroprene rubber series
    • ・Bearing plates : SPHC, SS400
    • ・Housing : FC250 spark silver metallic (melamine baking finish)
    • ・Bolts : SS400 unichrome plated

    (LM-16 and LM-20 cannot be leveled when installed on a gradient.
    Use this for fine adjustment after jacking up)

    Note : The bolt lengths marked with an asterisk mark are the semi-standard type.

    High Mounts LMY series

    • ・Anti-vibration rubber : HDR rubber
    • ・Leveling washer : SS400 unichrome plated
    • ・Housing : FC250 yellow (melamine baking finish))
    • ・Bolts : SS400 unichrome plated

    (LMY-16 and LMY-20 cannot be leveled when installed on a gradient.
    Use this for fine adjustment after jacking up)

    Note : The bolt lengths marked with an asterisk mark are the semi-standard type.